With the help of a puller (or as it is also called a lifter), it is possible to eliminate various mechanical damage on the surface of car body parts.
Using this device, you can quite quickly and with the highest quality repair dents or creases.
Factory pullers are not cheap, therefore, in this review, the author offers a budget option for the device. To make it, you need a gun for sealant.
Design features
First, we disassemble the sealant gun, cutting off all unnecessary. You need to leave only the handle with the trigger and the stem. The author himself sets the stock on the other side.
Next, you need to make a nozzle, which we put on the rod and fasten to the handle of the gun. The nozzle is a piece of the plate (emphasis for the cone - another nozzle), to which the author has welded the sleeve.
It is very simple to make the cone, it will take no more than one hour. In its upper part, a piece of steel pipe is welded, which is put on the sleeve.
A nut is screwed onto the end of the stem and then an elongated nut so that the contact can be tightened. Then an M8 pin is screwed into the elongated nut.
For details on how to make a convenient puller for a spotter with a do-it-yourself gun, see the video on our website.
