Manually pulling trees with roots out of the ground (for example, in a summer cottage or near a house) is too tedious and long. It’s easier to cut to the root, and all things. Well, or in extreme cases, using a shovel, dig out.
However, to solve this problem, the author offers an alternative option - to make a device for uprooting with one's own hands. And for this you need a brake pad from the car, as well as improvised materials.
First of all, it is necessary to cut a piece of a strip of metal, and with the help of a grinder make a small slot in it. Then it needs to be welded to the brake pad. If necessary, both parts must be cleaned from rust.
The main stages of work
Then the master cuts off two more segments of the strip (one narrow, the second a little wider), and welds them together at an angle of 90 degrees. On a wide plate, you will need to make notches. The master uses an angle grinder with a cutting wheel for this.
At the next stage, it is necessary to cut a piece of the profile pipe, in which two holes must be drilled and a cut made.
Then the master collects all the details "to the heap." The profile needs to be fastened to the brake shoe, and, in turn, a L-shaped part is attached to it.
For details on how to make your own hands a simple device for uprooting small trees in a summer cottage, we recommend that you look in the video on the site.
