If you like to shoot at empty cans or other stationary targets, make yourself a powerful pistol with a laser sight and a flashlight, made from scraps of plastic PVC pipes. Due to the simplicity of the design and the accessibility of the materials used, everyone can realize this amazing creative idea.
The main stages of work
We insert a piece of PVC tube into the tee, and on the other hand we glue a wooden plug with a rubber seal at the end. Then we insert this tube into a pipe of a larger diameter. We fix the trigger with a plastic tie to the tee, put it on the pipe and additionally fix it with rubber bands.
We cut another tee with a hacksaw along into two halves and fasten the bottom of the narrow pipe with adhesive tape. Inside, insert a piece of plastic pipe (ring) and an adapter with a tap. We perform the same operation on the other side, but instead of using the tap we use a tee.
At the next stage of work, we fasten the bundles and make the barrel - a metal tube of a suitable diameter pressed into a plastic pipe is used as a guide for steel balls. Then, from the scraps of PVC pipes, it remains only to make two mounts for the installation of a laser sight and a flashlight. A butt is made from a piece of pipe with a tee to make it more convenient to aim.
To summarize
The result was a little bulky, but very powerful and practical gun. Shooting targets at him is a pleasure. A laser pointer will help more accurately aim at the target, and the presence of a flashlight will allow you to shoot even in the dark. The process of assembling a gun from plastic pipes with a flashlight and a laser sight, see the video on the site.
